HP (Hewlett-Packard) 2230s Laptop User Manual


 
Support for up to 8192 MB of 667/800-MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB
Standard Memory
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB x 1024 MB)
4096 MB (2048 MB x 2)
Optional Memory
Upgrades
Support for up to 8192 MB of memory is available (with the installation of optional DDR2 SDRAM
memory kits). Both memory slots are user accessible. Please refer to the Hardware and Software
Guide for installation procedures. Maximized dual-channel performance requires SODIMMs of the
same size and speed in both memory slots.
Up to
Slot 1 Slot 2
1024 MB 1024 MB
Empty
2048 MB 1024 MB 1024 MB
3072 MB 2048 MB 1024 MB
4096 MB 2048 MB 2048 MB
8192 MB 4096 MB 4096 MB
NOTE:
This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some
third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If
you mix memory speeds, the system will perform at the lower memory speed. Full availability of 4 GB or more of memory
requires Windows Vista Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is
dependent upon your configuration, so that above 3 GB all memory may not be available due to system resource
requirements.
Memory Upgrades
HP 1 GB (DDR2 800 MHz) SODIMM
KT292AA
HP 2 GB (DDR2 800 MHz) SODIMM
KT293AA
HP 4 GB (DDR2 800 MHz) SODIMM
KT293AA
QuickSpecs
HP Compaq 2230s Notebook PC
Memory
DA - 13106 Worldwide QuickSpecs — Version 7 — 1/8/2009
Page 10