reference guide
use the fax features
67
fax
3 Press 3.
This selects Set New Defaults.
4 Press OK.
set fax options
There are numerous fax options that you can set, such as controlling whether the
HP PSC redials a busy number automatically. Review this section for information
on changing fax options.
This section contains the following topics:
• redial a busy or unanswered number automatically on page 67
• use error correction mode (ECM) on page 68
• set automatic reduction for incoming faxes on page 68
• adjust the volume on page 68
• change the answer ring pattern (distinctive ringing) on page 68
• set the date and time on page 69
• set the paper size on page 69
• set tone or pulse dialing on page 70
• set backup fax reception on page 70
redial a busy or unanswered number automatically
You can set your HP PSC to redial a busy or an unanswered number
automatically. The default setting for Busy Redial is Redial. The default setting
for No Answer Redial is No Redial.
1 Press Setup.
2 Do one of the following:
– To change the Busy Redial setting, press 4, and then press 3.
This selects Advanced Fax Setup and then selects Busy Redial.
– To change the No Answer Redial setting press 4, and then press 4
again.
This selects Advanced Fax Setup and then selects No Answer Redial.
3 Press to select Redial or No Redial.
4 Press OK.
Advanced Fax Setup
1. Fax Reports Setup
2. Answer Ring Pattern
3. Busy Redial
4. No Answer Redial
5. Automatic Reduction
6. Backup Fax Reception
7. E rror Co rre ct io n Mod e
Busy Redial
1. Redial
2. No Redial
No Answer Redial
1. No Redial
2. Redial