HP (Hewlett-Packard) 2600 All in One Printer User Manual


 
HP All-in-One • 7
14
13
a
b
c
ؚၲሽᆰऱሽᄭ
a !ؚၲሽᆰऱሽᄭΔؘ૞ழᓮ࿆ԵΔ൷ထ࿛ଢோ૿נ෼Ζ
b !ᣂຨٚ۶ၲඔऱ࿓ڤΖ
ீإ٨ٱᕠܚ
!༺Եᕠܚհ৵Δᄎנ෼ԫଡಛஒ᧩قᇘᆜբᄷໂீإΖ!
a !ਊՀψ!OK ω٨ٱீإ଄Ζ
b !ீإ଄ᄎٱנΖΰຍױ౨ᄎक़༓։ᤪऱழၴαΖ
c ! ඊದ።՗Ζലீإ଄૿ཛՀ࣋ᆜڇൿጒᕴੲᑿࣨऱ!Ѿ!ছֱߡ
ᆵΖᣂՂ።՗Ζ
d !٦ڻਊՀψ OK ωਊၨၲࡨீإΖ
!!໠ం!ਐقᗉೖַೂᡩհ৵Δ᧩قᕴᄎנ෼ԫଡಛஒ।قீإբݙګΖ
ڕ࣠ڇீإཚၴ࿇سംᠲΔᓮᒔࡳ൞բ࣋Եཏຏػ౐Ζ
ڃگࢨهඵᇠீإ଄Ζ!
Turn on your computer
a Turn on your computer, login if necessary, and then wait for the desktop to
appear.
b Close any open programs.
Align the print cartridges
After you insert the cartridges, a message appears that the device is
ready for alignment.
a Press OK to print the alignment page.
b The alignment page prints. (This may take a few minutes.)
c Lift the lid. Place the top of the alignment page face down in
the left front corner of the scanner glass. Close the lid.
d Press the OK button again to begin alignment.
After the On light stops blinking, a message appears on the display to
indicate alignment is complete.
If you have problems during alignment, make sure you loaded plain
white paper.
Recycle or discard the alignment page.