HP (Hewlett-Packard) 2600-PWR Series Switch User Manual


 
1-8
Getting Started
Need Only a Quick Start?
Figure 1-3. Getting Help in the CLI
For information on specific features in the Web browser interface,
use the online help. For more information, refer to the Management
and Configuration Guide for your switch.
For further information on ProCurve Networking switch technology,
visit the ProCurve website at:
http://www.procurve.com
Need Only a Quick Start?
IP Addressing
If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using multiple VLANs, ProCurve
recommends that you use the Switch Setup screen to quickly configure IP
addressing. To do so, do one of the following:
Enter setup at the CLI Manager level prompt.
ProCurve# setup
In the Main Menu of the Menu interface, select
8. Run Setup
For more on using the Switch Setup screen, see the Installation and Getting
Started Guide you received with the switch.