HP (Hewlett-Packard) 2650-PWR Switch User Manual


 
Using the HP Web Browser Interface
Status Reporting Features
Alert Types and Detailed Views
As of April, 2004, the web browser interface generates the following alert
types:
Auto Partition
Backup Transition
Excessive broadcasts
Excessive CRC/alignment errors
Excessive jabbering
Excessive late collisions
First Time Install
Full-Duplex Mismatch
Half-Duplex Mismatch
High collision or drop rate
Loss of Link
Mis-Configured SQE
Network Loop
Polarity Reversal
Security Violation
Stuck 10BaseT Port
Too many undersized (runt)/giant
packets
Transceiver Hot Swap
Note When troubleshooting the sources of alerts, it may be helpful to check the
switch’s Port Status and Port Counter windows and the Event Log in the
console interface.
By double clicking on Alert Entries, the web browser interface displays a
Detail View or separate window detailing information about the events. The
Detail View contains a description of the problem and a possible solution. It
also provides four management buttons:
Acknowledge Event – removes the New symbol from the log entry
Delete Event – removes the alert from the Alert Log
Cancel Button – closes the detail view with no change to the status of
the alert and returns you to the Overview screen.
A sample Detail View describing an Excessive CRC/Alignment Error alert is
shown here.
5-20