HP (Hewlett-Packard) 2700 All in One Printer User Manual


 
*Q5831-90175*
Q5831-90175
*Q5831-90175*
© Copyright 2005 Hewlett-Packard Development Company, L.P. Printed in [].
Printed on at least 50% total recycled fi ber with at least 10% post-consumer paper.
Problem: You did not see the screen prompting you to connect the USB cable.
Action: Remove, and then re-insert the HP All-in-One Windows CD. Refer to Steps 14
and 15.
Problem: The Microsoft Add Hardware screen appears.
Action: Click Cancel . Unplug the USB cable, and then insert the HP All-in-One
Windows CD. Refer to Steps 14 and 15.
Problem: The Device Setup Has Failed To Complete screen appears.
Action: Verify that the control panel faceplate is fi rmly attached. Unplug the
HP All-in-One and plug it in again. Check all connections. Make sure the USB cable is
plugged into the computer. Do not plug the USB cable into a keyboard or non-powered
hub. Refer to Steps 14 and 15.
Troubleshooting
Problem: A Paper Jam message appears.
Action: Remove the back access door, and then gently pull out any paper. Turn the
device off, and then on. Load the paper again.
Printed in [].