Filter
Top Products
667-MHz* DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 512 MB, 1024 MB, 2048 MB
Standard Memory
512 MB (512 MB x 1)
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Optional Memory
Upgrades
Support for up to 4096 MB of memory with the installation of optional DDR2 SDRAM memory kits.
Both memory slots are user accessible. Please refer to the Hardware and Software Guide for
installation procedures. Maximized dual-channel performance requires SODIMMs of the same
size and speed in both memory slots.
Up to
Slot 1 Slot 2
1024 MB 1024 MB
Empty
1024 MB
512 MB 512 MB
1536 MB 1024 MB
512 MB
2048 MB 1024 MB 1024 MB
4096 MB 2048 MB 2048 MB
NOTE:
This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some
third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If
you mix memory speeds, the system will perform at the lower memory speed. Above 3-GB, all memory may not be available
due to system resource requirements.
Memory Upgrades
HP 512-MB (DDR2 667 MHz) SODIMM
EM993AA
HP 1024-MB (DDR2 667 MHz) SODIMM*
EM994AA
HP 2048-MB (DDR2 667 MHz) SODIMM*
EM995AA
* System runs at a maximum of 533-MHz.
QuickSpecs
HP Compaq 2710p Notebook PC
Memory
DA - 12718 Worldwide QuickSpecs — Version 11 — 8.27.2007
Page 13