Filter
Top Products
2-11
Installation and Configuration
Click on the tab (Information, Parameters, Report, Language, or Remote to move between windows.
The Apply button applies the selected parameter, language, or remote setting to the HP OfficeJet.
Exiting the Service Application
Whenever exiting the Service Application Program, allow 5 to 10 seconds for the hardware to
terminate the factory and service capability.
To exit or quit the program, click on the Exit button. After depressing the Exit button, be sure to wait 5 to 10 seconds
for the hardware to terminate the factory and service capability before taking any other action. During the transition
observe the HP OfficeJet front panel LCD display for the following events:
D The phrase “Enter header number” appears on the top line of the HP OfficeJet LCD display.
D A string of characters appears on the bottom line of the HP OfficeJet LCD display.
D The HP OfficeJet LCD display blanks out briefly and returns to the normal “ready” state
Changing Parameters
Clicking on the “Parameters” tab in the service application main menu causes the window to appear as follows:
To change an HP OfficeJet parameter, perform the following steps:
1. Enter the parameter number.
2. Click on Retrieve to display the current value.
3. Type the new value in the Enter new value dialog box.
Note: If the user enters the same value in the “Enter new value” dialog box that appears
in the “Current value” Dialog box, the Retrieve and Apply buttons will be grayed
C A U T I O N