Filter
Top Products
2-14
Installation and Configuration
D The phrase “Enter header number” appears on the top line of the HP OfficeJet LCD display.
D A string of characters appears on the bottom line of the HP OfficeJet LCD display.
D The HP OfficeJet LCD display blanks out briefly and returns to the normal “ready” state
Setting Remote Service
Clicking on the “Remote” tab in the service application main menu causes the window to appear as follows:
Click the square by the text,“Enable remote operation” to select On, then click “Apply”. Enabling remote operation
allows a service representative to diagnose HP OfficeJet from a remote location. When remote operations are
complete, click the square by the text, “Enable remote operation”a second time to select Off, then click “Apply”.
Exiting the Service Application
Whenever exiting the Service Application Program, allow 5 to 10 seconds for the hardware to
terminate the factory and service capability.
To exit or quit the program, click on the Exit button. After depressing the Exit button, be sure to wait 5 to 10 seconds
for the hardware to terminate the factory and service capability before taking any other action. During the transition
observe the OfficeJet front panel LCD display for the following events:
D The phrase “Enter header number” appears on the top line of the HP OfficeJet LCD display.
D A string of characters appears on the bottom line of the HP OfficeJet LCD display.
D The HP OfficeJet LCD display blanks out briefly and returns to the normal “ready” state
C A U T I O N