Filter
Top Products
2-21
Installation and Configuration
Installing an Input Tray
The input tray is also known as the paper supply tray. This tray is where paper is loaded for the printing
of received faxes, print jobs, reports and copies. The tray holds 100 sheets of paper.
SL2
SL5
12
4
Remove the output tray from the HP OfficeJet
Series 300.
Remove the old tray by pulling the input tray for-
ward to expose the flex tabs. Press down firmly
on the two flex tabs and pull the input tray out of
the unit. If the tray does not easily release, the
user may need to slide the tray in slightly, press
the flex tabs down again and pull the tray forward
and out of the unit..
When installing the new input tray, ensure
that the tray is properly aligned with its seat
and slide it all the way into the machine.
Flex Tab
Flex Tab
SL6
SL3A
3
Pull the input tray out and check the posi-
tion of the paper size setting. Adjust if
necessary.
Slide the green paper guide until it snaps into
place at the appropriate paper size setting.
Note: Only letter-, legal-, and A4-size paper
can be loaded for fax reception and copying.
Paper Guide
Be sure to set the paper size in the menu.