Filter
Top Products
2-24
Installation and Configuration
Setting the Paper Size in the Front Panel Menu
Set the paper size in the menu to match the paper size loaded in the input tray. Setting the paper size allows the
HP OfficeJet Series 300 to scale incoming faxes to fit the paper size loaded. The factory setting is Letter (8 1/2
x 11 inches). If Letter size paper is loaded, no change is required unless the menu setting was previously
changed and not reset to Letter size. If Legal or Envelope sizes are loaded, set the menu to the appropriate size.
Using
Do this:
these buttons: For this display:
1. Press the Menu button to display
the menu.
Menu
MENU
Time/Date, Header
2. Press Right Arrow multiple
times to move to “Paper Size.”
Paper Size
3. Press Enter/Save to select “Paper
Size.” The selected paper size is
marked with an asterisk (*).
Enter/Save
PAPER SIZE
Letter (8.5 x 11 in) *
Enter/Save
MENU
4. Press Right Arrow multiple times
to move to the desired setting.
(The example is “Legal.”)
PAPER SIZE
Legal (8.5x14 in) *
Enter/Save
6. Press Enter/Save to return to the
Ready display.
5. Press Enter/Save to select the
displayed setting. An asterisk (*)
denotes the new selection.
PAPER SIZE
Ready Auto
Oct-10-95 10:47 AM
The paper size
in an HP OfficeJet Series 300 is setup during installation of the software but can be changed using the
HP OfficeJet Series 300 Manager software by selecting the Loaded Paper Size in the HP OfficeJet Series 300 Setup
dialog box as described in the HP OfficeJet Series 300 User’s Guide for the user’s model.
Legal (8.5x14 in)
The paper size can also be set using the front panel menu as described below.