Filter
Top Products
5-45
Problem Resolution
Print Stored Params: A four-page hard copy printout of all parameter values. The report provides the
following: 1. Parameter number
2. Brief parameter description.
3. Current parameter values.
4. Default parameter values if different from the current value.
Change Stored Params: Provides the ability to change the value of any parameter. After selecting this
item, the procedure to change a parameter value is as follows:
1. Type in the parameter number to be changed, then press “Enter/Save”
2. Type in the desired parameter value, then press “Enter/Save”
The new value is now stored and will be retained even if the unit is powered
OFF.
Remote Operations: Allows parameter values to be sent to, or received from, a remote or local
device. There are four menu selections available from this menu item as
follows:
Receive from REMOTE: The remote device must have “Remote Service” selected to ON from the
“Phone Setup” User Menu. After selecting this item, the display will request the
remote fax machine’s number. The remote HP OfficeJet Series 300 will be
called and all parameter values will be copied into the calling unit, including all
the user menu setup items. The calling HP OfficeJet Series 300 will be
effectively cloned to the remote HP OfficeJet Series 300.
Send to REMOTE: The remote device must have “Remote Service” selected to ON from the
“Phone Setup” User Menu. After selecting this item, the display will ask if you
want to send the remote device all parameter values or only non-user menu
items:
1 = All (all parameter values)
2 = Params only (non-user menu parameters only)
Selecting ALL will effectively clone the remote device to the calling device
including header information and speed dial numbers. Selecting Params only
will not affect the remote device’s header or speed dial number information or
any other settings from the normal user menu.
Receive from LOCAL: This feature is used between two HP OfficeJet Series 300s that are connected by
a common phone cord plugged into the LINE connector on each device. An
outside phone service or telephone line simulator is not required. Selecting this
menu item will clone this device to the other HP OfficeJet Series 300. The other
HP OfficeJet Series 300 must be set to Send to LOCAL before data will actually
be received. This feature may also be selected by pressing the 7 and 4
buttons simultaneously while powering the unit ON.
Send to LOCAL: This feature is used between two HP OfficeJet Series 300s that are connected by
a common phone cord plugged into the LINE connector on each device. An
outside phone service or telephone line simulator is not required. Selecting this
menu item will clone the other HP OfficeJet Series 300 to this device. The other
HP OfficeJet Series 300 must be set to Receive from LOCAL before data will
actually be received. This feature may also be selected by pressing the 4 and
1 buttons simultaneously while powering the unit ON.
Note: The order in which you select Receive from LOCAL and Send to LOCAL
devices is not important.