Filter
Top Products
Safety & Regulatory Information www.hp.com 2–1
2
Power Cord Set Requirements
The power supply for the computer may have a power switch. This
feature allows the computer to be operated on an input voltage of
100–200V or 200–400V.
The power cord set (flexible cord or wall plug) received with this
product meets the requirements for use in the country where you
purchased the equipment.
If you need to obtain a power cord for a different country, you should
purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and
current marked on the product’s electrical ratings label. The voltage
and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the diameter of the
wire must be a minimum of 0.75 mm
2
or 18AWG, and the length of
the cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). If you
have questions about the type of power cord to use, contact the HP
authorized service provider.
A power cord should be routed so that it is not likely to be walked on
or pinched by items placed upon it or against it. Particular attention
should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.
Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this product.
Ä
CAUTION: Do not use the power cord received with this product on any
other products.