Filter
Top Products
Using an Internal Modem
Modem and Networking 1–3
Using a Country-Specific Modem Cable
Adapter
Software for the internal modem supports multiple countries, but
telephone jacks vary by country. To use the modem and the RJ-11
cable outside the country in which you purchased the notebook,
you must obtain a country-specific modem adapter and define
your location in Dialing Properties.
To connect the modem to an analog telephone line that does not
have an RJ-11 telephone jack:
1. If the modem cable has noise suppression circuitry 1, orient
the circuitry end of the cable toward the notebook.
2. Plug the modem cable into the RJ-11 telephone jack 2 on the
notebook.
3. Plug the modem cable 3 into the country-specific modem
adapter.
4. Plug the country-specific modem adapter 4 into the
telephone jack.
Connecting the modem using a country-specific modem adapter
HP_MN_316748-002.book Page 3 Friday, February 14, 2003 11:23 AM