Filter
Top Products
Hardware Reference Guide 1–13
Hardware Upgrades
Replacing or Upgrading a Drive
The computer supports up to five drives that may be installed in
various configurations.
This Section describes the procedure for replacing or upgrading the
storage drives. A Torx T-15 screwdriver is needed to remove and
install the guide screws on a drive.
Ä
CAUTION: Make sure personal files on the hard drive are backed up to
an external storage device before removing the hard drive. Failure to do
so will result in data loss. After replacing the primary hard drive, you will
need to run the Restore Plus! CD to load the Compaq factory-installed
files.