Filter
Top Products
6
Connecting to a Novell NetWare 4.11 Server
Microsoft Windows 95 SR2.5
4 Connecting to a Novell NetWare 4.11 Server
Microsoft Windows 95
SR2.5
Requirements
Procedure
1
With the HP Vectra turned off, install the network adapter into a PCI slot.
2
Connect the network cable to the newly installed network adapter.
3
Power on the machine and boot to Windows 95.
4
Windows 95 will detect the network adapter as “3Com Etherlink PCI
Combo NIC (3C900B-COMBO)” during start up and install the OS
embedded driver.
5
Click on “YES” when Windows 95 prompts to restart the system.
6
After restarting the system, additional changes in the network properties,
such as: workgroup name, computer name, etc. may be necessary. Ask
your Network Administrator for more information. Restart the system if
changes are made.
7
From the location of the “Novell Client v3.1 for Windows 95/98”
installation files, execute “Setup.exe”.
8
Click on “Yes” to accept the “Novell Terms and Conditions”.
9
Select either “Typical” or “Custom” and click on “Install”. Typical
Installation is normally chosen. Select Custom Installation only if you are
an administrator or an advanced user. When prompted for options during
installation, ask your Network Administrator for more information.
10
Click on “Reboot” once the installation is complete.
Operating System
Windows 95 SR2.5
Driver Version
1.51
Driver File
El90xbc5.sys
Server OS
NetWare 4.11 Server
Client OS
Novell