Filter
Top Products
English 7
HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide
Overview of the Installation Procedure
Non-Supported Network Drivers
The following network drivers are provided on the
EtherDisk
®
diskettes but are not supported by HP:
Overview of the Installation Procedure
CAUTION
Your PC and network interface card can be permanently damaged by
static electricity. Before handling the card, touch the unpainted part
of your PC’s metal chassis. Maintain grounding by wearing a wrist
strap attached to the chassis. Handle the card by its backplate and
top edge. Do not touch the edge connector.
Installing the 3C905C-TX NIC is a 4-step process. You need to:
• Install the card in your PC.
• Connect the card to the network.
• Update LAN-specific fields in the HP PC Setup utility.
• Install the driver software.
After you complete the installation, you can use the NIC Doctor
software to troubleshoot any problems.
Network Operating System Network Driver Name
Banyan VINES EL90X.DOS
Artisoft LANtastic EL90X.DOS
IBM LAN SERVER (DOS) EL90X.DOS
IBM LAN SERVER (OS/2) EL90X.OS2
DEC PATHWORKS EL90X.DOS (DOS) and
3C90X.COM (Netware)
3Com.book Page 7 Tuesday, August 31, 1999 11:36 AM