HP (Hewlett-Packard) 4310S Laptop User Manual


 
1066/1333 MHz DDR3 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB
Standard Memory
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB x 1024 MB)
4096 MB (2048 MB x 2)
Optional Memory
Upgrades
Support for up to 8192 MB of memory with the installation of optional SDRAM memory kits. Both memory
slots are user accessible. Please refer to the Hardware and Software Guide for installation procedures.
Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory
slots.
Up to
Slot 1 Slot 2
1024 MB 1024 MB
Empty
2048 MB 1024 MB 1024 MB
3072 MB 2048 MB 1024 MB
4096 MB 2048 MB 2048 MB
8192 MB 4096 MB 4096 MB
NOTE:
This chart does not represent all possible memory configurations. Full availability of 4 GB or more of memory requires
Windows Vista Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is dependent upon
your configuration, so that above 3 GB all memory may not be available due to system resource requirements. Due to the non-industry
standard nature of some third-party memory modules, we strongly recommend using only HP branded memory modules to ensure
compatibility. If you mix memory speeds, the system will perform at the lower memory speed.
Memory Upgrades
HP 1 GB (DDR3 1066/1333 MHz) SODIMM
TBD
HP 2 GB (DDR3 1066/1333 MHz) SODIMM
TBD
HP 4 GB (DDR3 1066/1333 MHz) SODIMM
TBD
QuickSpecs
HP ProBook 4310s Notebook PC
Memory
DA - 13354 Worldwide QuickSpecs — Version 6 — 9.28.2009
Page 12