Filter
Top Products
23
services, enabling a resilient, highly secure, mobile multi-service network. Each “WES” Module can
control up to 156 HP ProCurve Radio Ports (light access points) to provide Layer 2/3 seamless
roaming and a secure mobility environment.
Wireless sFlow support provides leveraged network management for both wired and wireless
connections.
Up to four modules can be installed in a single chassis, and a redundant WESM (J9052A) version
automatically adopts radio ports if the primary module is unavailable or should fail.
HP ProCurve Radio Ports supported (ordered separately)
• J9004A HP ProCurve Radio Port 210 (single IEEE 802.11g radio) Integrated antenna
• J9006A HP ProCurve Radio Port 230 (dual radio a+b/g) Integrated antenna
• J9005A HP ProCurve Radio Port 220 (dual radio a+b/g) Plenum rated, external antennas required
Notes
HP ProCurve Redundant Wireless Services zl Module (J9052A) provides redundancy.
HP ProCurve ONE Services zl Module (J9289A)
Description
Part of the HP ProCurve ONE program that enables secure best-in-class applications and services in
the ProCurve infrastructure, the HP ProCurve ONE Services zl Module is an x86-based server module
that provides two 10-GbE network links into the switch backplane and contains a 255 MB 7200 rpm
SATA hard disk drive. Coupled with ProCurve certified services/applications that can take advantage
of a switch-targeted API for better performance, this module creates a virtual appliance within a zl
switch slot to provide solutions for business needs, such as network security. The HP ProCurve
Services zl Module can be moved to any zl switch in the environment.
Consult the HP ProCurve Web site for applications available for use with the HP ProCurve Services zl
Module and for information concerning the HP ProCurve ONE program.
Notes
Use of the HP ProCurve Services zl Module restricts the temperature specification for the 5400 switch
to 50°C if all installed modules are on the left side of the chassis. If any installed module is on the right
side of the chassis, the temperature specification of the entire switch is limited to 40°C.
The Services Module can only be used with certified OA services applications. It does not support a
general application environment.