Filter
Top Products
Hardware and Connection Details
• The StorageWorks 4400 (MSA30) series of storage enclosures are supported
for use with the KZPDC controller at up to U3 (Ultra160) SCSI data transfer
rates.
• All supported external enclosures ship with U3 SCSI compliant cables. See the
QuickSpec for your HP StorageWorks storage enclosure for the list of
supported cables.
• The model 4254 P/N 138151-001 (DS-SSL14-RS) contains an Ultra2 capable
I/O module which is dual bus only.
• The model 4354 P/N 190211-001 (DS-SL13R-BA) contains an Ultra3 capable
I/O module which is dual bus only.
• The model 4214 P/N 103381-001 (DS-SSL14-RM) contains an Ultra2 capable
I/O module which is single bus only.
• The model 4314 P/N 190209-001 (DS-SL13R-AA) contains an Ultra3 capable
I/O module which is a single bus only.
• For the models 4254 and 4354, the device ID's on each bus segment will be 0
through 5 and 8. ID's 6 and 7 are reserved.
• For the models 4214 and 4314 the device ID's on each bus segment will be 0
through 5 and 8 through 15. ID's 6 and 7 are reserved.
• Also contained in the 4254, 4354, 4214 and 4314 is an EMU P/N 70-40064-03
with fault bus support.
• HP StorageWorks Enclosure 4200 (models 4254 and 4214) or 4300 (models
4354 and 4314) device shelves cannot be daisy chained together.
• With Tru64 UNIX, depending on the particular system configuration, using
the MC2 page jumper set for 512MB may cause errors similar to
"ciss_map_data"to appear in the system logs. If this happens, change the
jumper to the 128MB position.
All of the cluster members need to have the jumper configured the same way.
Release Notes – Smart Array 5300A Backplane RAID Controllers 15