Filter
Top Products
Local port operation 28
Click Clear to remove all servers from the scan list.
2. Click OK to save settings.
Activating Scan mode
1. From the Commands dialog box ("Accessing the Commands dialog box" on page 38), select Scan
Enable.
2. Click X to close the Commands dialog box.
NOTE: The scanning begins as soon as you click Scan.
Deactivating Scan mode
If the OSD is open, select a server.
-or-
If the OSD is not open, move the mouse or press any key on the keyboard. Scanning stops at the currently
selected server.
-or-
From the Commands dialog box ("Accessing the Commands dialog box" on page 38), deselect Scan
Enable. Any active connections on the local port are disconnected.
Setting local console switch security
The OSD enables you to set security on the local port consoles. You can establish a Screen Saver mode
that engages after the HP KVM Server Console Switch G2 remains unused for a user-definable time
delay. When engaged, the HP KVM Server Console Switch G2 remains locked until any key is pressed or
the mouse is moved. Then you can enter the password to log in.
Use the Security dialog box ("Accessing the Security dialog box" on page 29) to lock your HP KVM
Server Console Switch G2 with password protection, set or change the password, and enable the screen
saver.
NOTE: If a password has been previously set, you must enter the password before you can
access the Security dialog box.