Filter
Top Products
1
Hot Swappable Power Supply Ordering Guide
Power supply overview
Adopting advanced power supply design, the HP A5800-48G-PoE+ Switch with 2 Interface Slots
(hereafter referred to as A5800-48G-PoE+ (2 slot)) and HP A5800-48G-PoE+ TAA Switch with 2
Interface Slots (hereafter referred to as A5800-48G-PoE+ TAA (2 slot)) features the following:
• Adopting hot swappable power supply design, each switch providing two hot swappable power
supply slots, as shown in
Figure 1.
• Supporting different models of hot swappable power supplies. For more information, see
Table 1.
• Supporting combination of different hot swappable power supplies. You can select them as
needed. For more information, see
Table 2.
Figure 1 Location of power supplies on an A5800-48G-PoE+ (2 slot)/A5800-48G-PoE+ TAA (2 slot)
(rear panel)
(1) Hot swappable power
supply 1
(2) Filler module (Remove the module when hot swappable power supply 1 is
a 750 W power supply.)
(3) Hot swappable power
supply 2
(4) Filler module (Remove the module when hot swappable power supply 2 is
a 750 W power supply.)
NOTE:
The A5800-48G-PoE+ (2 slot)/A5800-48G-PoE+ TAA (2 slot) provides two power supply slots on its
rear panel. Hot swappable power supply
slot 1 is empty when the switch is shipped, and hot swappable
power supply slot 2 is installed with a filler panel.
Figure 1 illustrates a switch with two PSR300-12A AC
power supplies.
Table 1 Power supply models supported by the A5800-48G-PoE+ (2 slot)/A5800-48G-PoE+ TAA (2
slot)
Model Power supply mode
PSR300-12A (JC087A) AC input (Rated voltage range: 100 VAC to 240 VAC; 50 Hz or 60 Hz)