Filter
Top Products
Description Spare part number
For use in HP EliteBook 8560p models
Included in Display Panel Support Kit, for use in HP ProBook 8560p models
641201-001
657829-001
Display Panel Support Kit (includes WLAN antennas, WWAN antennas, and display enclosure)
For use in HP ProBook 6560b models 657831-001
For use in HP EliteBook 8560p models 657829-001
For a list of display spare parts, see Display components on page 34.
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 58).
5. Remove the following components:
a. Bottom door (see
Bottom door on page 64).
b. Hard drive (see
Hard drive on page 69)
c. Optical drive (see
Optical drive on page 65)
d. WLAN module (see
WLAN module on page 76)
e. WWAN module (see
WWAN module on page 74)
f. Fan (see
Fan on page 85)
g. Heat sink (see
Heat sink on page 86)
h. Modem module (see
Modem module on page 83)
i. Keyboard (see
Keyboard on page 92)
j. Bottom cover (see
Bottom cover on page 94)
k. System board (see
System board on page 106)
Remove the display assembly:
1. Position the computer right-side up with the front toward you.
2. Open the computer as far as possible.
3. Remove the four Phillips PM2.5×4.5 screws (1) that secure the display to the computer.
112 Chapter 4 Removal and replacement procedures