Filter
Top Products
Hardware options installation 38
9.
Install the SFF drive cage assembly.
10. Connect the drive backplane cables:
a. Connect the power cable to the backplane.
b. Connect the Mini-SAS cables to the backplane and to a storage controller option.
For cable routing information, see "Eight-bay SFF drive cabling (on page 63)."
11. Install the drives ("Drive options" on page 30).
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
12. Install the air baffle (on page 22).
13. Install the access panel (on page 21).
14. Install the tower bezel (on page 19).
15. Connect each power cord to the server.