Filter
Top Products
hp photosmart 7200 series
chapter 2
12
insert a memory card
After you have taken pictures with your digital camera, remove the memory card
from your camera and insert it into your printer. You can print photos immediately
or save the photos to your computer.
When the memory card is inserted correctly, the memory card light blinks and
then remains solid.
Caution! Do not pull out the memory card while the memory card light is
blinking. Removing a memory card while it is being accessed may damage
the printer or the memory card, or corrupt the information on the memory
card.
To insert a memory card:
1 Remove any memory cards that may already be inserted into any of the
memory card slots.
For information about removing memory cards, see the HP Photosmart
Printer Help. For information about viewing the Printer Help, see view the
hp photosmart printer help on page 1.
2 Find the correct slot for your memory card.
Note: To use a Sony Memory Stick Duo
™
memory card, insert the memory
card into the adapter that came with the Memory Stick Duo before you insert
it into the printer’s memory card slot.
3 Insert the memory card into the appropriate memory card slot. The end
with the metal contacts or pinholes must go into the printer first.
Caution! Inserting the memory card any other way may damage the
memory card or the printer.
4 Gently push the memory card into the printer until it stops. The memory
card may not insert all the way into the printer.
Caution! Forcing the memory card into the printer too far may damage the
memory card or the printer.
Note: If you insert a SmartMedia memory card upside down, the red
memory card light will begin blinking. Remove the memory card and
reinsert it properly.
Sony Memory Stick
CompactFlash/
IBM Microdrive
MultiMediaCard/
Secure Digital
SmartMedia/
xD-Picture Card