Filter
Top Products
Intel Advanced Management Technology (AMT) v5.0
– An advanced set of remote management features and
functionality which provides network administrators the latest and most effective tools to remotely discover, heal, and
protect networked client systems regardless of the system's health or power state. AMT 5.0 includes all features described
as part of Intel Standard Manageability plus the following advanced management functions:
Fast Call for Help
–
a client inside or outside the firewall may initiate a call for help via BIOS screen, periodic
connections, or alert triggered connection
Remote Scheduled Maintenance
–
pre-schedule when the PC connects to the IT or service provider console for
maintenance. Remote PCs can get required patches, be inventoried, etc by connecting to their IT console or Service
Provider when it's convenient
Remote Alerts
–
automatically alert IT or service provider if issues arise
Access Monitor
–
Provides oversight into Intel® AMT actions to support security requirements
Microsoft NAP Support
–
Allows AMT 5.0 to gain access to a Microsoft NAP enabled 802.1x network OOB to enable OOB
SW updates, inventories, remote diagnostics, etc. NAP is a new platform and solution that controls access to network
resources based on a client computer's identity and compliance with corporate governance policy. NAP allows network
administrators to define granular levels of network access based on who a client is, the groups to which the client belongs,
and the degree to which that client is compliant with corporate governance policy. If a client is not compliant, NAP provides
a mechanism to automatically bring the client back into compliance and then dynamically increase its level of network
access.
When a client attempts to access the network or communicate on the network, it must present its system health state or
proof of health compliance. If a client cannot prove it is compliant with system health requirements (for example, that it has
the latest operating system and antivirus updates installed), its access to the network or communication on the network can
be limited to a restricted network containing server resources so that health compliance issues can be remedied. After the
updates are installed, the client requests access to the network or attempts the communication again. If compliant, the
client is granted unlimited access to the network or the communication is allowed.
Redundant Array of Independent Drives (RAID)
Flexible implementation
:
DriveLock is supported while in RAID mode. Users can manage the DriveLock password from within F10 Setup.
Locked drives will be displayed as such in the RAID option ROM interface.
Hard drive information can be viewed within F10 Setup while in RAID mode. Previously, the hard drives will not
appear in Drive Configuration when switching to RAID mode.
DPS Self Test can be executed on physical hard drives while in RAID mode.
The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.
NOTE:
RAID 1 is the only RAID configuration offered via factory configurations. The pre-configured systems:
Are only available on the CMT and SFF form factors. The USDT does not support RAID as it does not allow for more
than one hard disk drive.
Are complete RAID systems and have both drives installed. If the CMT is configured with three hard disk drives, the
third drive is would be unpartitioned and not part of the RAID array
Have the necessary Option ROM configuration.
Are pre-loaded and pre-installed with all required Intel software.
Include a preinstalled operating system that is mirrored mode out of the box.
Please refer to the HP White Paper titled “Advanced Host Controller Interface (AHCI) and Redundant Array of Independent
Disks (RAID) on HP Compaq 8000 Elite Series PCs” at:
http://www.hp.com
for more information and instructions.
QuickSpecs
HP Compaq 8000 Elite PC
Standard Features and Configurable Components (availability may vary by country)
DA - 13424 Worldwide QuickSpecs — Version 17 — 6/25/2010
Page 8