DDR3 PC3-10600 SDRAM (1333 MHz)
*
Two SODIMM slots supporting dual-channel memory
SODIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB
Standard Memory
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB + 1024 MB)
4096 MB (4096 MB x 1 or 2048 MB x 2)
Optional Memory Upgrades
Support for up to 8192 MB of memory with the installation of optional DDR3 SDRAM
memory kits. Both memory slots are user-accessible. Please refer to the Hardware and
Software Guide for installation procedures. Maximized dual-channel performance requires
SODIMMs of the same size and speed in both memory slots.
Up to
Slot 1 Slot 2
1024 MB 1024 MB
Empty
2048 MB 2048 MB
Empty
2048 MB 1024 MB 1024 MB
3072 MB 2048 MB 1024 MB
4096 MB 4096 MB
Empty
4096 MB 2048 MB 2048 MB
8192 MB 4096 MB 4096 MB
* With some processors, memory bus runs at a maximum of 1066 MHz.
NOTE:
This chart does not represent all possible memory configurations. Due to the non-
industry standard nature of some third-party memory modules, we strongly recommend
using only HP- branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Full availability of 4 GB or more
of memory requires a Windows 64-bit operating system or Linux. With Windows 32-bit
operating systems, the amount of usable memory is dependent upon your configuration, so
that above 3 GB all memory may not be available due to system resource requirements.
Memory Upgrades
HP 1 GB (DDR3 1333 MHz) SODIMM
AT911AA
HP 2 GB (DDR3 1333 MHz) SODIMM
AT912AA
HP 4 GB (DDR3 1333 MHz) SODIMM
AT913AA
QuickSpecs
HP EliteBook 8440p Notebook PC
Memory
DA - 13520 Worldwide QuickSpecs — Version 12 — 5/24/2010
Page 16