Filter
Top Products
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at
the Gold level, see:
www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked
per ISO 11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 90% recycle-able when properly disposed of
at end of life.
Packaging Materials
External:
Paper 97 g
Internal:
Polyethylene low density solid 13 g
Molded Pulp 100 g
Polyethylene low density 4 g
The paper material is made from 80% recycled content.
The Polyethylene low density solid is made from 100% recycled
content.
The Molded Pulp is made from 80% recycled content.
The Polyethylene low density material is made from 100%
recycled content.
HP follows these guidelines to decrease the environmental impact of
product packaging:
Eliminate the use of heavy metals such as lead, chromium,
mercury and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in
packaging materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation
fuel efficiency.
Plastic packaging materials are marked according to ISO 11469
and DIN 6120 standards.
Material Usage
This product does not contain any of the following substances in excess
of regulatory limits (for reference of these limits please refer to the HP
General Specification of the Environment:
(
http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/
gen_specifications.html
):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
QuickSpecs
HP EliteBook 8540p Notebook PC
Technical Specifications
DA - 13521 Worldwide QuickSpecs — Version 7 — 3.1.2010
Page 34