Filter
Top Products
52
EN
4
From the list of printer names along the right side of
Chooser
,
select the name of the printer (even if it is the only one that
appears).
5
Click
Setup
.
6
Click
Select PPD
.
7
From the list of PPD files, click
HP Color LaserJet 8550 Printer
.
8
Click
Select
.
9
Click
Configure
.
10
Enter the appropriate selections for the printers installed options
and click
OK
.
11
Click
OK
to complete the setup. An icon appears next to the
name of the printer.
12
Close
Chooser
.
Configuring the Printer on the Network
Configure the printer in one of two ways:
z
Print directly to the printer through EtherTalk.
z
Print through the network by printing to a print queue. Set up the
print queue using the network software.
The HP LaserJet Utility allows printer settings such as printer name
and preferred zone to be configured from the Macintosh system. HP
recommends that only system administrators use the printer
configuration capabilities of this utility.
If the printer is to be serviced by a print spooler, set up the printers
name and zone before configuring the spooler to capture the printer.