Filter
Top Products
EN
Common messages 29
Printing
FUSER LIFE LOW
REPLACE KIT
Although printing can continue, the fuser
should be replaced for optimum printer unit
operation.
FUSER LIFE OUT
REPLACE KIT
Replace the fuser kit and reset the fuser
counter before attempting to print.
INPUT DEVICE
PAPER PATH OPEN
Close the media transfer door.
INSTALL <COLOR> TONER
Insert the cartridge or make sure the installed
cartridge is fully seated in the printer unit.
INSTALL FUSER
LOWER LEFT DOOR
Install the fuser and verify that it is properly
seated in the printer unit before attempting to
print.
INSTALL IMAGING DRUM
OPEN FRONT DOOR
Install the imaging drum before attempting to
print.
INSTALLTRANSFER DRUM
OPEN RIGHT DOOR
Install the transfer drum before attempting to
print.
LOCK TONER LEVER
Open the front door of the printer unit, open
the clear door, swing the blue lever to the left
to lock it. Close the clear door and the front
door.
MANUALLY FEED
<TYPE> <SIZE>
Load the correct type and size media into
Tray 1.
OFFLINE
Press G
O
to bring the printer unit online.
POWERSAVE ON
Clear this message by pressing any key or by
sending a print job to the printer unit.
PROCESSING
COPY <X> OF <Y>
No action is required.
PROCESSING JOB
No action is required.
TONER LOW
REPLACE <COLOR>
Although printing can continue, the toner
cartridge should be replaced for optimum
printer unit operation.
Printer unit control panel messages (continued)
Control panel message Recommended action