Filter
Top Products
70
PIN code
When the printer is set to encryption required (see page 71), devices attempting to
use the printer are prompted for a PIN code.
The default PIN code is
0. You can change the PIN code by using the Configure
Wireless Settings dialog box. See change wireless settings
on page 73.
access modes
Access modes determine the level of access that Bluetooth wireless technology
enabled devices have to the printer.
The printer has four access modes:
• public mode
• private mode
• turn off Bluetooth
• encryption required
To set the access mode for the printer, use the Configure Wireless Settings dialog
box. See change wireless settings
on page 73.
public mode
When the printer is in Public Mode:
• Any Bluetooth wireless technology enabled device within range can discover
the printer.
• The Bluetooth LED light is on.
private mode
When the printer is in Private Mode:
• Only devices that have stored its Bluetooth device address can discover it.
• The Bluetooth LED light is off when the printer is idle.
• You can put the printer in a temporary Public Mode by pressing and holding
down the
Power button until the Bluetooth LED light flashes. The printer returns to
Private Mode after 1 minute.
turn off Bluetooth
When the printer’s Bluetooth feature is turned off:
• The printer cannot be discovered by other Bluetooth wireless technology
enabled devices.
• The Bluetooth LED light is off when the printer is idle.