Filter
Top Products
Figure 5. Installing the adapter in the I/o bulkhead
8. Press down on the rear of the SCSI adapter until its connector is fully
inserted into the receptacle on the core I/O or expansion I/O adapter.
9. Secure the adapter by tightening the two retaining screws (Iocated on the
front of the core I/O or expansion YO bulkhead).
10. If the SCSI adapter was installed in the expansion I/O, record the expansion
I/O slot number for future reference.
11.
Re-install the core I/O or expansion I/O. Refer to the computer system
manual for information on re-installing the core I/O or expansion I/O.
Installation Procedures 23