HP (Hewlett-Packard) A4800A Network Card User Manual


 
Installing the A4800A Adapter
Looking at Adapter Installation
Chapter 2 19
2. Issuing command-line commands using rad.
For detailed information about the use of either of these two procedures,
please refer to the following document:
Configuring HP-UX For Peripherals, HP Part Number B2355-90698
This document may be ordered from HP, or you may view, download and
print it from the following website: www.docs.hp.com
IMPORTANT In many cases, other interface cards and slots within the system are
dependent upon the target card. For example:
If the target card is a multiple-port card, suspending or deleting drivers
for the target card slot also suspends individual drivers for the multiple
hardware paths on that card).
Table 2-1 Important Terms
Term Meaning
OLAR All aspects of the OLAR feature
including On-line Addition
(OLA) and On-line Replacement
(OLR).
Power Domain A grouping of 1 or more
interface card slots that can be
powered on or off as a unit.
(NOTE: Multi-slot power
domains are not currently
supported)
target card / target card slot The interface card which will be
added or replaced using OLAR,
and the card slot in which it
resides.
affected card / affected card
slot
Interface cards and the card
slots in which they reside, and
which are in the same power
domain as the target slot.