Filter
Top Products
Power connector cable
Description Spare part number
Power connector cable 680548-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 31).
5. Remove the service door (see
Service door on page 32).
6. Remove the optical drive (see
Optical drive on page 33).
7. Remove the hard drive (see
Hard drive on page 36).
8. Remove the keyboard (see
Keyboard on page 43).
9. Remove the top cover (see
Top cover on page 46).
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Remove the power connector from the base enclosure (2).
Reverse this procedure to install the power connector cable.
64 Chapter 4 Removal and replacement procedures