Filter
Top Products
NIC
NICNIC
NIC
Realtek RTL8111C Ethernet Connection, 10/100/1000, with WOL support
LAN STATUS:
10MB
100MB
1000MB
Activity is occurring (Left
LED):
LED ACTIVE LED ACTIVE LED ACTIVE
Link Status
(right LED):
None
LED On LED On
Keyboard
KeyboardKeyboard
Keyboard
Keyboard not included. PS/2 or USB supported.
NOTE:
NOTE: NOTE:
NOTE:
A keyboard is required to unbundle the software image.
Pointing Device
Pointing DevicePointing Device
Pointing Device
Pointing Device not included. USB supported. Pointing devices include a mouse, trackball, touch pad,
etc.
Multi Track (3) Magnetic
Multi Track (3) MagneticMulti Track (3) Magnetic
Multi Track (3) Magnetic
stripe reader (MSR)
stripe reader (MSR)stripe reader (MSR)
stripe reader (MSR)
Integrated MSR available on some select models. Conforms to ANSI/ISO 7810, 7811 1/5, 7812, and
7813;
Supports OPOS and JPOS drivers layer; 3 tracks: IATA, ABA, THRIFT; bi-directional swipe, LED indicates
status of reader.
NOTE:
NOTE: NOTE:
NOTE:
The MSR is standard on some models and optional on others
Vacuum Fluorescent
Vacuum FluorescentVacuum Fluorescent
Vacuum Fluorescent
Display (VFD) (Customer
Display (VFD) (CustomerDisplay (VFD) (Customer
Display (VFD) (Customer
Facing)
Facing)Facing)
Facing)
2 line x20 character display (40 characters total), RS232 interface, DC 5Volts (V) (COM 2 port set to 5V
at HP factory in BIOS setup). Supports complex character set, control commands, user-defined fonts and
international fonts. Display pitch adjustment 80 degrees (10 degrees to 90 degrees)
WARNING
WARNINGWARNING
WARNING
: VFD must be connected to the COM 1 or COM 2 port (It should not be connected to
COM3 port because COM 3 does not support DC5V. Connecting the VFD into COM 3 port may
damage the VFD COM 1 may be used for the VFD but 5V will need to be selected in BIOS Setup for
COM 1.
NOTE:
NOTE: NOTE:
NOTE:
The VFD occupies COM 2 port from the HP factory. Although three COM ports are present on
the HP ap5000, COM 2 port is occupied by the VFD on factory configured models; therefore, only two
COM ports are available to the end user when the VFD is installed.
NOTE:
NOTE: NOTE:
NOTE:
The VFD is standard on select models and also available as an optional kit
Advertisement panel
Advertisement panelAdvertisement panel
Advertisement panel
This non-electrical panel features a clear cover. It may be removed so that print material/advertisements
can be displayed. HP provides a template for the advertisement panel.
QuickSpecs
HP ap5000 All-in-One (AiO) Point of Sale (POS) System
HP ap5000 All-in-One (AiO) Point of Sale (POS) SystemHP ap5000 All-in-One (AiO) Point of Sale (POS) System
HP ap5000 All-in-One (AiO) Point of Sale (POS) System
Standard Features
DA - 13540 Worldwide — Version 13 — January 30, 2012
Page 4