Filter
Top Products
3. Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable. Refer to Figure 2-5
Connecting the Cables on page 8Figure 2–7 and Figure 2-6 Connecting the Cables (HP
LA1956x Model) on page 8Figure 2–8.
NOTE: The monitor is capable of supporting either analog or digital input. The video mode is
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the +/source button on the front panel
or through the On-Screen Display (OSD) feature by pressing the Menu button.
●
For analog operation, connect the VGA signal cable to the VGA connector on the rear of the
monitor and the other end to the VGA connector on the computer (cable provided with select
models).
●
For DVI digital operation, connect the DVI-D signal cable to the DVI connector on the rear of
the monitor and the other end to the DVI connector on the computer (cable provided with
select models).
●
For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort
connector on the rear of the monitor and the other end to the DisplayPort connector on the
computer (cable provided with select models).
4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the
computer, and the other end to the upstream USB connector on the monitor.
ENWW
Connecting the Cables
7