Filter
Top Products
TheZoneFlexParfeatureisavailableinbothOpenFabric1.0andHomogeneous
Fabric 1.0 Interop modes, as well as in environments with loop-attached devices. In
Homogeneous Fabric 1.0 mode, the default zone is treated like any other zone, and
RSCNs are sent only to the affected devices if the default zone is enabled or disabled. A
PFE key is not required for the Zone FlexPar feature, and it c an be enabled or disabled
through CLI for a specific switch. When upgrading to firmware 07.01.02-4 or installing
anewswitchwithfirmware 07.01.02-4 the feature is enabled by default, allowing it
to work immediately. If the Zone FlexPar feature is not enabled on all switches in the
fabric, the restricted RSCN distribution only applies for devices attached to switches
with the feature enabled.
Enhanced SAN
tegritySecuritySuite
SANtegrity Se
curity Suite enhanced features include authentication support for device
login, inter
switch c onnections and management interfaces. The Secure Access features
are include
d as a standard part of the SANtegrity Security Suite in firmware 07.01.02–4.
Standard features
The following SANtegrity features do not require a license or SANtegrity Binding.
• CHAP Authentication for HAFM/SWAPI—Thisprovidesauthenticationof
connections from the HAFM appliance service processor and SWAPI Direct
Connect. This ensures that requested HA FM management sessions or SWAPI
Direct Connect sessions are f rom a trusted source.
• Encryption of Passwords and Secrets Shared with HAFM—All secrets and
password information are passed in encrypted format for greater security.
This prevents “snooping” of Ethernet connection to capture user login and
authentication secret information.
• R A DIUS Ser ver Support—This provides support for IETF R A D IUS (Remote
Authentication Dial In User Service) protocol for password authentication.
Firmware 07.01.0 2-4 allows users to configure settings for using a RADIUS
server. RAD IUS provides centralized authentication services for multiple devices
on a network. This means that several switches can be con figured to use a
single RADIUS server.
• Prompted Change of EWS and CLI Passwords from Default—This prompts users
to modify the password settings for both the CLI and EWS interfaces the first time
they lo g in using either of these interfaces.
• RBAC Phase I: Enhanced User Rights Configuration—RBAC is role based access
control. This is the first phase of more comprehensive role-based access control
planned for the CLI and EWS interfaces. Multiple users can now be configured
for EWS or CLI, or both, through either interface. This allows users to c onfigure
additional user name/password combinations.
• SSH for CLI—Secure Shell (SSH) provides an encrypted connection, as an
alternative to Telnet, to secure CLI access to switches and directors.
14