![](http://pdfasset.owneriq.net/2/91/2912f5e8-0fac-429e-baee-7f20c6dc9c9c/2912f5e8-0fac-429e-baee-7f20c6dc9c9c-bg2a.png)
Remove the base enclosure:
1. Turn the computer face down, remove the 12 Phillips PM 7.5 millimeter long screws.
2. Remove the bottom enclosure.
NOTE: To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool
Shroud separator, available on the HP website.
34 Chapter 4 Removal and replacement procedures