Filter
Top Products
HP e-Class Blade PC Enclosure (sold separately)
HP e-Class Blade PC Enclosure (sold separately)HP e-Class Blade PC Enclosure (sold separately)
HP e-Class Blade PC Enclosure (sold separately)
Rack Capability
Rack CapabilityRack Capability
Rack Capability
Mounts in HP 10000 and 9000 series, HP System-E, as well as third-party, and Telco racks. Rack
mounting hardware for HP and third-party racks ships standard with each blade enclosure. Telco rack-
mounting hardware is a separately available option kit.
Rack Airflow
Rack AirflowRack Airflow
Rack Airflow
Requirements
RequirementsRequirements
Requirements
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted blade PCs. The HP 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with blade PCs using the latest processors.
CAUTION:
CAUTION:CAUTION:
CAUTION:
If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U rack includes closing front and rear doors, you must allow
5,350 square cm (830 square inches) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 7 cm (2.75 inches).
CAUTION:
CAUTION:CAUTION:
CAUTION:
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE:
NOTE:NOTE:
NOTE:
Please consult the Setup & Installation Guide for the blade PC for additional details.
Enclosure includes
Enclosure includesEnclosure includes
Enclosure includes
3U high rack-mountable chassis with 20 blade PC bays
Rack mounting hardware for HP, Compaq-branded and third-party racks
Rear bay for Interconnect Switch for network cable management
Two (2) Diagnostic Adapters (see features following) for connecting keyboard, video, mouse and other
devices locally to individual blade PCs
ProLiant Essentials Foundation Pack licenses for 20 Blade PCs (see features following), includes the HP
Systems Insight Manager and ProLiant Essentials Rapid Deployment Pack CD
Four hot-plug fans
Dual hot-plug power supplies (600 watts each), power cords
Blade PC blanks (to fill 19 of the 20 blade PC bays)
Null-modem cable for serial connection to the Integrated Administrator serial "Console" connector
HP Documentation CD
Diagnostic Adapter
Diagnostic AdapterDiagnostic Adapter
Diagnostic Adapter
Interfaces
InterfacesInterfaces
Interfaces
NOTE:
NOTE:NOTE:
NOTE:
Two Diagnostic Adapters are included with every enclosure.
Blade PC LEDs (6)
PS/2 Mouse
PS/2 Keyboard
VGA monitor (functional only when graphics diagnostics card installed)
Serial RS-232 port
USB 1.1 ports (2)
QuickSpecs
HP bc1000 blade PC
HP bc1000 blade PCHP bc1000 blade PC
HP bc1000 blade PC
Standard Features
DA - 11903 North America — Version 5 — May 20, 2005
Page 4