Filter
Top Products
HP 3PAR 7400 Remote Copy Drive LTU
BC784A*
HP 3PAR 7450 Remote Copy Base LTU
BC894A*
HP 3PAR 7450 Remote Copy Drive LTU
BC895A*
HP 3PAR Remote Copy 10400/4x400GB SSD LTU
BC963A*
HP 3PAR Remote Copy 10800/4x400GB SSD LTU
BC974A*
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE)
. E-Delivery
should be ordered with any Standalone or Upgrade software order.
NOTE:
Physical software licenses for T-Class are available only in China. All other
regions are expected to order E-delivery licenses only
Product Highlights
Autonomic Configuration
: With the HP 3PAR ® Management Console, even multi-site DR can be set
up and tested in just minutes, and from a single window. Built-in, autonomic configuration
capabilities unique to 3PAR Remote Copy enable DR to automatically and intelligently configure
itself. With just a few clicks, you can set up and test remote replication with HP 3PAR StoreServ, or a
combination of arrays at multiple sites.
Multi-Protocol Support
: With Native IP as well as Fibre Channel (FC) support, 3PAR Remote Copy
delivers out-of-the-box connectivity over your IP network, enabling you to replicate data more
cost-effectively by leveraging your existing infrastructure. Achieve robust DR without the expensive
converters and management of a separate, special-purpose infrastructure.
Host-Independent Replication
: HP 3PAR Remote Copy is a host-independent, array-based data
mirroring solution that boosts performance by offloading host servers of replication tasks. HP 3PAR
Virtual Volumes (VVs) are mirrored from one HP 3PAR array to another over variable distances using
the mode of operation that best fits your needs.
Flexible, Modular Architecture
: HP 3PAR Remote Copy is supported on all StoreServ arrays (both
high-end and mid-range), all of which are scalable to meet your precise requirements. This
flexibility gives you the ability to implement right-sized systems that meet the unique needs of
each location. No more purchasing and managing high-end arrays even in DR configurations where
smaller mid-range arrays could suffice. HP 3PAR Remote Copy also allows you to configure remote
mirrors with different RAID properties from their source volumes so you can more precisely tailor
protection levels and cost.
Balanced Performance
: HP 3PAR Remote Copy's line-trunking capability simplifies data
transmission by making the most efficient use of all configured network links. Data transfers are
autonomically balanced across all links, thus avoiding bottlenecks. Line-trunking also increases
availability by automatically rebalancing the load in case of a link failure.
Long Distance Replication with Zero Data Loss
: HP 3PAR Remote Copy offers a unique
Synchronous Long Distance mode that allows you to meet low RTOs and zero-data loss RPOs with
complete distance flexibility while saving on hardware
Thin Provisioning Awareness
: HP 3PAR Remote Copy is "thin provisioning-aware", so target
volumes provide the same cost and ease-of-use benefits as thin source volumes. With the
combination of HP 3PAR Thin Provisioning and HP 3PAR Remote Copy, both primary and remote
sites can share in the benefits of allocating volumes just once while consuming only necessary
physical capacity. The result is unprecedented efficiency in data replication.
HP 3PAR Peer Persistence
Overview
HP 3PAR Peer Persistence software allows companies to federate their 3PAR StoreServ Storage systems
across geographically separated data centers. This inter-site federation of storage allows customers to
use their data centers more effectively by allowing them to move applications from one site to another as
per their business need, and more importantly, without any application downtime.
QuickSpecs
HP 3PAR Software Products
Product Specifications - HP 3PAR OS Host Software
DA - 13964 Worldwide — Version 14 — December 9, 2013
Page 15