Filter
Top Products
S
ETTING
U
P
Y
OUR
P
RINTER
2.31
2
Using the Set IP (BP20N only)
The Set IP can detect printers in the same network and display
the network information. In addition, this application can
configure the network information of the printer that has own
network interface card.
Installing Set IP
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and a maintenance
window appears.
If the maintenance window does not appear, click
Start
and
then Run. Type
X:
\Setup.exe
, replacing “
X
” with the letter of your drive
and click
OK
.
2
Click
Next
.
3
Select
Custom installation
. Click
Next
.
4
Select your printer and click
Next
.
N
OTES
: If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click
Next
.
• If you don’t want to connect the printer at this time, click
Next
,
and
No
on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
5
Check
Set IP
and then click
Next
.
6
When the installation is completed, click
Finish
.