Filter
Top Products
3. Lift the power cable assembly from the computer (2).
Reverse this procedure to install the power cable.
Latch assembly
NOTE: The Latch Kit includes the latch, bracket, two screws, and spring.
Description Spare part number
Latch Kit 684635-001
Before removing the latch assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 42).
5. Remove the following components:
a. Bottom door (see
Bottom door on page 44).
b. Optical drive (see
Optical drive on page 46)
c. WLAN/Bluetooth module (see
WLAN/Bluetooth combo card on page 54)
d. WWAN module (see
WWAN module on page 52)
e. Keyboard (see
Keyboard on page 56)
f. Top cover (see
Top cover on page 67)
Component replacement procedures 95