Filter
Top Products
Regulatory Information
Europe
Declaration of Conformity (according to
ISO/IEC Guide 22 and EN 45014)
Manufacturer: Hewlett-Packard Company
Address: Hewlett-Packard Company
Computer Peripherals Bristol
Filton Road
Stoke Gifford
Bristol BS34 8QZ
United Kingdom
declares that the following products
Product Name: HP SureStore Tape 5000i
HP SureStore DAT8i
HP SureStore DAT24i
HP SureStore DAT40i
conform to the following product specifications
Safety: IEC 950:1991+A1,A2
EN 60950 (1992)+A1,A2
EMC: CISPR 22:1993/EN 55022 (1994)
EN50082-1:1992
IEC 801-2:1991/prEN 55024-2 (1992):
4kV CD, 8kV AD
IEC 801-3:1984/prEN 55024-3 (1991):
3V/m
IEC 801-4:1988/prEN 55024-4 (1992):
0.5 kV signal lines, 1.0kV power lines
LED Emission Level
This equipment has been tested and found to
comply with the limits for a Class 1 LED product,
set out in the international standard for safety of
laser products.
TUV (Internal Tape Drives Only)
This equipment must be supplied by a Safety-
Extra-Low-Voltage (secondary circuit in accordance
with DIN VDE 0805. During incorporation of the
equipment, all requirements of DIN VDE 0805
must be observed and obeyed.
General Approval
NS/G/1234/J/100003
This Hewlett-Packard tape drive meets the General
Approval NS/G/1234/J/100003 requirements.
U.S.A.
Notice (Internal Tape Drives Only)
For use only in UL
®
listed personal computers.
Canada
Canadian Standards Association
Information Statement
(Internal Tape Drives Only)
INSTRUCTION TO USER:
WARNING: This component is only considered to
be approved when installed in CSA certified
equipment evaluated to the standards C22.2 No.
220-M1986 or C22.2 No. 950-M89. The operator
accessibility into the end use enclosure is defined
with strict accordance in the operator’s manual for
the installation of components into the equipment.
INSTRUCTIONS AUX UTILISATEURS:
AVERTISSEMENT : Ce composant n’est considéré
agréé que s’il est installé dans un équipement
certifié CSA selon les normes C22.2 No. 220-M1986
ou C22.2 No. 950-M89. L’accessibilité de l’opérateur
à l’enceinte est définie en stricte conformité avec le
manuel de l’opérateur pour l’installation de
composants dans l’équipement.
Dat-int.bk Page 5 Wednesday, May 26, 1999 10:46 AM