HP (Hewlett-Packard) DL180 Server User Manual


 
Expansion Slots
Slot Number
Bus Speed
Bus Number
*
Device
Number
**
Hot Plug
(Y/N)
Notes
1
x16 PCI-
Express
6 0
N
Low Profile
2
x8 PCI-Express
5 0
N
Full Length
Full Height
3
x8 PCI-Express
4 0
N
Full Length
Full Height
4
x4 PCI-Express
3 0
N
Full Length
Full Height
2
PCI-X
***
Dynamic
1
N
Full Length
Full Height
3
PCI-X
***
Dynamic
2
N
Full Length
Full Height
NOTE:
All slots can accept universal keyed PCI cards.
NOTE:
Support is limited to PCI-X cards only.
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
*** PCI-X bus speed will be 100MHz in maximum and support two PCI-X/100MHz cards.
**** Slot 2 contains bus 4 and bus 5 because BIOS configures this x16 PCI-express.
NOTE:
PCI-X support is limited to PCI-X cards only.
NOTE:
Slot to two x8 PCI-express slot for production riser, this is valid only on Option1: 2
PCIe2x8 full-length/full-height PCI-Express slots (Optional) or Option 4: 2 PCIe2x8 and 1 PCIex8
(4) full-length/full-height slots (Optional).
Storage Controller
4HDD Models
HP Smart Array B110i SATA RAID
NOTE:
To enable RAID on Embedded SATA, use the HP Smart Array
B110i SATA RAID Controller, To enable use of the B110i, enter the
ROM based setup utility(RBSU). The option for enabling RAID can be
found in the Advanced section of the RBSU.
NOTE:
Embedded SATA controller support transfer rate up to 3Gb/s
NOTE:
A diskette drive or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating
system installation from a CD.
8HDD Models
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE:
Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
12HDD Models
HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE:
Available upgrades: P410 with FBWC, 256MB with BBWC,
512MB with FBWC, Battery kit upgrade (for the 256MB cache), and
Smart Array Advanced Pack (SAAP).
NOTE:
Support transfer rate up to 3Gb/s SAS or 3Gb/s SATA
25HDD Models
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE:
Available upgrades: P410, 512MB with FBWC, Battery kit
upgrade (for the 256MB cache), and Smart Array Advanced Pack
(SAAP).
NOTE:
Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
QuickSpecs
HP ProLiant DL180 Generation 6
Standard Features
DA - 13248 Worldwide QuickSpecs — Version 22 — 7/13/2010
Page 7