Filter
Top Products
Hardware options installation 31
4.
Install the hard drive.
Optical drive assembly option
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
NOTE: The server supports slimline optical devices, including CD-ROM, DVD-ROM, and DVD-RW.
1. Power down the server ("Powering down the server" on page 15).
2. Remove the server from the rack ("Removing the server from the rack" on page 16).
3. Remove the access panel ("Removing the access panel" on page 17).
4. Remove the fan assembly ("Removing the fan assembly" on page 18).
5. Disconnect the front panel LED board cable.
6. Disconnect cables from any devices installed in the media cage, if necessary.