Filter
Top Products
9
Bay Technical Associates
Port Select Code: $BT
Attention Character: ;
DS73 (2,1).................... 1
Device A (3,1).................... 2
Device B (3,2).................... 3
Device C (3,3).................... 4
Device D (3,4).................... 5
Configure ............................... C
I/O Module Reset ........................ RM
Unit Reset .............................. RU
Exit .................................... X
Logout .................................. T
Enter Request : C
Configuration
Module 1...............1
Module 2...............2
Module 3...............3
Select Port............S
Exit...................X
Enter Request: 2
By responding to the Enter Request: message at the end of the configuration menu with “2” you receive the
configuration menu for Module 2 that looks similar to the following:
DS73 Ethernet Module
F 0.02 Copyright (c) 1997
Bay Technical Associates
Enter user name: user1
Enter password: BTA
Login successful.
Module IP Address: 200.4.3.72 Dial-In IP Address: 200.4.3.73
Subnet Mask: 255.255.255.0 Gateway Addr: 200.4.3.1
Primary DNS: 0.0.0.0. Secondary DNS: 0.0.0.0.
Primary NBNS: 0.0.0.0. Secondary NBNS: 0.0.0.0.
Ethernet Addr: 00.C0.48.1A.24.5D ID MSG/Login: enabled/enabled
IP Address.................... 1 Network Cable Connections: good
Module IP Address............. 1
Dial-In Ip Address............ 2
Subnet Mask................... 3
Gateway....................... 4
Primary DNS................... 5
Secondary DNS................. 6
Primary NBNS.................. 7
Secondary NBNS................ 8
User Name..................... 9
Password..................... 10
Module name...................11
Exit.......................... X
NOTE: For detailed configuration information see the DS-Series Owner’s Manual Number U140E121-03(Section 6).
IMPORTANT: There should be no active connections while configuring the unit. Reset the base unit after
configuration.
5.1 MODULE IP ADDRESS