Filter
Top Products
10
Type “1” (Module IP Address), at the end of the main configuration menu and you can program the IP address. The
DS73 will respond with:
Enter Module IP address in dotted decimal form:
Enter the desired Module IP address as a series of four numbers separated by periods (e.g., 197.3.14.9) followed by
Carriage Return.
NOTE: The first part of the Module IP address is determined by assigned network address.
IMPORTANT: The Module IP address must be programmed before the DS73 module can be accessed on the
network. After programming the IP address, the unit must be reset for the new information to take effect.
5.2 DIAL-IN IP ADDRESS
Type “2” (Dial-in IP Address) at the end of the main configuration menu and you can program the Dial-in IP
address. The DS73 will respond with:
Enter Dial-in IP address in dotted decimal form:
Enter the desired Dial-in IP address as a series of four numbers separated by periods (e.g., 197.3.14.9) followed by
Carriage Return.
NOTE: The first part of the Module IP address is determined by assigned network address.
IMPORTANT: The Module IP address must be programmed before the DS73 module can be accessed on the
network. After programming the IP address, the unit must be reset for the new information to take effect.
8.3 SUBNET MASK
Type “3”(Subnet Mask) at the end of the main configuration menu and you can program the Subnet Mask. The
DS73 will respond with:
Enter Subnet Mask in dotted decimal form:
Enter the desired Subnet Mask as a series of four numbers separated by periods (e.g., 255.255.255.0) followed by
Carriage Return.
IMPORTANT: The Subnet Mask must be programmed before the DS73 module can be accessed on the network.
After programming the Subnet Mask, the unit must be reset for the new information to take effect.
8.4 GATEWAY
Type “4”(Gateway) at the end of the main configuration menu and you can program the Gateway or router address.
The DS73 will respond with:
Enter Gateway address in dotted decimal form:
Enter the desired Gateway or router address as a series of four numbers separated by periods (e.g., 197.3.14.1)
followed by Carriage Return.
IMPORTANT: After programming the Gateway address, the unit must be reset for the new information to take
effect.
8.5 Primary DNS
Type “5”(Primary DNS) at the end of the main configuration menu and you can program the Primary DNS. The DS73
will respond with: