Filter
Top Products
Service Reference Guide 431672-001 6–21
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
7. Remove the screws 1 that secure Floppy drive and Optical drive.
Removing the Optical Drive or Diskette Drive
To replace the drive, reverse the removal procedures.
✎
When replacing the drive, transfer the four screws from the old drive to the new one. The screws
take the place of drive rails.
6.8.5 Installing an Optional Optical Drive - SFF chassis
To install an optional optical drive:
1. Remove the optical drive if present.
2. Install the guide screws as indicated.
Ä
CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the
internal components of the drive.