Filter
Top Products
Service Reference Guide 431672-001 6–19
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
5. Hard disk is inserted or slide out from the back.
Removing the Hard disk
6. Remove one guide screws (Floppy Drive only) from the old drive. You will need these
screws to install a new drive.
Å
WARNING: There may be sharp edges on the insides of the bay opening after the shield has been
removed.
6.8.3 Locating Drive Positions - SFF chassis
Desktop Drive Positions
*
*
* These apply for selected models and countries only.