Filter
Top Products
9. If it is necessary to replace the display hinges:
a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the display hinges to the
display panel.
b. Remove the display hinges (2).
10. If it is necessary to replace the display panel cable:
a. Release the webcam/microphone module cable from the adhesive (1) attached to the
display enclosure.
b. Release the display panel cable from the clips (2) and routing channel built into the
display enclosure.
c. Remove the display panel cable (3).
72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts